IT Support & Networks · Unit 6 of 8
Unit 6: Wi-Fi and home networks
Wi-Fi bands, signal and interference, securing a network and setting up or fixing a home network.
Opens the first lesson of this unit in IT Support & Networks. Every lesson is open from the start.
Lesson 1: How Wi-Fi works: bands and standards
Goal: Choose between Wi-Fi bands for a situation.
Wi-Fi sends data by radio, on a few frequency bands. Each has trade-offs:
| Band | Range | Speed | Interference |
|---|---|---|---|
| 2.4 GHz | Longest; goes through walls best | Slowest | Most crowded: neighbors, Bluetooth, microwaves |
| 5 GHz | Shorter | Much faster | Less crowded |
| 6 GHz (Wi-Fi 6E and Wi-Fi 7) | Shortest | Fastest | Least crowded; needs newer devices |
Wi-Fi versions have names: Wi-Fi 5, Wi-Fi 6 (and 6E), and Wi-Fi 7. Newer versions handle many devices at once better and are faster, but a connection only runs at the best version that both the router and the device support.
Many routers broadcast one network name and move devices between bands automatically ("band steering"). If a device far from the router keeps dropping, putting it on 2.4 GHz can help; for a laptop in the same room as the router, 5 GHz or 6 GHz will be much faster.
- 2.4 GHz band
- Wi-Fi band with the longest range but the lowest speed and most interference.
- 5 GHz band
- Wi-Fi band with shorter range but much higher speed.
- SSID
- The name of a Wi-Fi network.
Remember: 2.4 GHz reaches farther; 5 and 6 GHz go faster at shorter range.
Lesson 2: Signal, interference and coverage
Goal: Diagnose weak Wi-Fi and fix coverage problems.
Weak Wi-Fi is usually a placement problem, not a speed-plan problem. Signals weaken with distance and through obstacles: concrete, brick, metal, mirrors, fish tanks and floors are especially bad.
- Place the router centrally and up high, out in the open, not inside a cabinet, behind a TV or on the floor.
- Reduce interference: keep it away from microwaves, cordless phone bases and other electronics.
- Change the channel if many neighbors' networks overlap; many routers can choose automatically.
- Extend coverage for large or multi-floor homes with a mesh system (several units working as one network) or a wired access point. Basic plug-in "extenders" can help, but often halve speed.
- Use a cable for stationary, demanding devices.
Worked example: the slow upstairs bedroom
- A speed test is fast next to the router but very slow upstairs.
- The router sits in a basement corner behind the furnace.
- Moving it to a central shelf on the main floor improves the upstairs speed a lot; adding a mesh node upstairs fixes the rest.
Same internet plan, same router: placement made the difference.
Run speed tests in the same spots before and after a change, so you know whether it actually helped. That is the troubleshooting method at work.
- Interference
- Other signals or obstacles that weaken or disrupt Wi-Fi.
- Mesh Wi-Fi
- Several units working together to cover a large area with one network.
- Channel
- A slice of a Wi-Fi band. Overlapping channels from nearby networks cause interference.
Remember: Central, high and in the open. Test before and after any change.
Lesson 3: Securing a network
Goal: Lock down a router and Wi-Fi with current best practices.
An unsecured network lets strangers use your connection, and possibly see or attack your devices. Securing a home or small-office network takes about fifteen minutes:
- Change the router's admin password. This is the password for the router's settings page, which is different from the Wi-Fi password. Default admin passwords are published online.
- Use WPA3 encryption if all your devices support it, otherwise WPA2. Never use WEP or an open network: both are easily broken or unprotected.
- Use a strong Wi-Fi password: long, like a passphrase of several random words.
- Update the router's firmware (its built-in software), or turn on automatic updates.
- Use a guest network for visitors and smart-home gadgets, so they are kept apart from your main computers.
- Turn off WPS (the push-button or PIN pairing feature) if you do not use it; the PIN method has known weaknesses.
Watch out: Only configure networks you own or are responsible for. Accessing other people's networks or router settings without permission is illegal in most places, even if they are unprotected.
- WPA3 / WPA2
- Current Wi-Fi security standards that encrypt traffic. WPA3 is newer and stronger.
- Firmware
- The built-in software that runs a device like a router.
- Guest network
- A separate Wi-Fi network for visitors or gadgets, isolated from your main devices.
Worked example: securing a new home router in 15 minutes
- Open the router's settings page using the address printed on its label, from a device on that network.
- Change the admin password to a long, unique one and save it in a password manager.
- Set Wi-Fi security to WPA3, or WPA2/WPA3 mixed mode if older devices need it, with a long passphrase.
- Turn on automatic firmware updates, create a guest network for visitors and gadgets, and turn off WPS.
- Reconnect each device, then note where the settings live for next time.
Remember: New admin password, WPA3 or WPA2, long Wi-Fi passphrase, firmware updates, guest network.
Lesson 4: Setting up and fixing a home network
Goal: Bring a home network back online with a reliable sequence.
When "the internet is down" at home, this sequence fixes most problems and tells you where the fault is:
- Check scope: is it one device or all of them? One device points to that device; all devices point to the network.
- Check the lights on the modem and router. Many have an "internet" or "online" light. Is it off, or blinking red or orange?
- Restart in order: unplug the modem and router. Plug in the modem first and wait until it is fully online (often 1 to 3 minutes), then the router. The router needs a working modem to get its internet connection.
- Check cables are firmly in the right ports: the modem's output goes to the router's port marked WAN or Internet.
- Check the ISP: most providers have an outage page or app. If there is an outage, wait; no fix on your side will help.
- Test a device with a cable plugged straight into the router. If wired works but Wi-Fi does not, the problem is the wireless side.
Worked example: one device only
- Everyone else is online; only one laptop says "No internet".
- Turn its Wi-Fi off and on, or "forget" the network and reconnect with the password.
- Still failing? Check its IP address: 169.254.x.x means it is not getting an address (Unit 5). Restart the laptop, and update its network driver.
- WAN port
- The router port that connects to the modem and the internet, often labeled Internet.
- Power cycle
- Turning a device fully off and back on to reset it.
Remember: All devices or one? Lights, restart modem first then router, cables, ISP outage page, then test wired.
Practise it in IT Support & Networks
Each lesson ends with two or three questions that check you can use the idea, not just recognise it. Wrong answers explain why and come back in Review. The unit ends with a 6-question quiz; pass it with 80% or more to master the unit.
Every lesson is free: no ads, no lives and no paywall.